Spider Crack economy grade pavement crack filler is perfect for those cracks less than ½” in width and for relatively narrow surface pavement cracks and joint filling. This economical crack filler is good for non-active cracks and refilling during maintenance. This ready-to-use formula is for any paved surfaces such as parking lots, athletic courts, running tracks, driveways, playgrounds and walkways.
- Prevents moisture from entering the subgrade
- Fast drying
- Good resilient characteristics
- Warm climate durability and flexibility
- For pavement cracks up to ½” in width
SURFACE PREPARATION: Surface must be clean, dry and free of all dirt dust and debris. For cracks exceeding ½” to 1” fill with Sealcoating.com’s Fat Crack PREMIUM Trowelable Crack Seal. Cracks containing oil or petroleum contaminants can be treated using Sealcoating.com’s Seal Over + to improve adhesion and the ability for the seal coat to bond to the pavement.
APPLICATION: Mix material well prior to using as is. Pourable crack filler can be applied with a pour pot dispenser or suitable crack sealing applicator cart or machine. Scrape or squeegee flush to surface using a rubber bladed squeegee tool and allow to cure completely before sealing the pavement. To promote adhesion to refined tar or asphalt emulsion pavement sealers sprinkle or “over sand” with a fine mesh sand with screened consistency before set up. Sanding over the top can reduce tracking during hot temperature curing times and can reduce downtime.
COVERAGE PER GALLON: Estimated to cover up to 80 linear feet of ½” X ½” depth cracks, but coverage is indefinite.
CAUTION: KEEP FROM FREEZING. Do not use if surface is wet, or it is suspected to rain. Do not store in hot temperatures or use product when temperature is below 50°F. Keep container out of the reach of children and closed when not in use
PACKAGING: 1 gallon jugs, 5 gallon pails and 55 gallon drums.
| MATERIAL SPECIFICATIONS: | REQUIREMENTS: |
| Weight per gallon, @ 77°F, ASTM D1010 (lbs) | 9.30 - 9.50 |
| Viscosity @ 77°, ASTM D562 (Kreb’s Stormer Unit) | 75 - 80 |
| % Weight Solids | 52.00 - 55.00 |
| Drying time (minutes) ¼” x ¼” @ 77°f & 50% RH | 60 min. |
| AASHTO M 140-70 | meets spec. |
Safety Data Sheet (SDS) - Click to View PDF in New Window | Click to Download PDF
Product Info Sheet (INFO) - Click to View PDF in New Window | Click to Download PDF
| Product | Weight |
|---|---|
| 5 Gallon Pail | 22.226 kg |
| Case of Qty 6 - 1 Gallon Containers | 27.216 kg |
| 5 Gallon Pail (default) | 22.226 kg |
| Case of Qty 6 - 1 Gallon Containers (default) | 27.216 kg |
Place item into cart to check shipping cost of this item:
Get shipping estimates