Skipdash Fast Dry Line Paint 275 Gal Tote

Skipdash Asphalt Line Paint is a Fast Dry modified latex emulsion of superior quality and toughness made for professional line stipers.  It can be used on all pavement surfaces.  Sprays smooth and dries faster.  Use if for your next job.  It can be used for parking lots, traffic islands, walkways, aisles, fire lanes, safety areas, roadways, handicap areas, tennis courts, and playgrounds.  

• Good for all pavement marking projects
• Modified latex emulsion line paint
• Superior toughness

Surface Preparation:  Surface should be clean and free from dirt, dust, debris, and oil.  Etching Concrete surfaces is advised prior to use.  Do not stripe when pavement is wet or rain if forecast soon after.  Skipdash Asphalt Line Marking Paint should be applied when temperatures are above 50 degrees.

Application:  Mix well before use and if applied by spray it is best to strain the paint and you may also dilute slightly with water if needed.  Brush or roll on as is.  This paint formula will dry under normal conditions in about 30 minutes.  If areas of painting are shaded or in cooler temperatures longer drying times may be required.  Normal conditions may require 4 to 6 hours of drying time for no traffic pick-up.

Coverage:  400 to 500 linear feet of 4” stripe per gallon, 800 to 900 linear feet of 2” stripe per gallon, 250 to 300 linear feet of 6” stripe per gallon.

CAUTION:  KEEP FROM FREEZING.  Do not stripe when rain is in forecast, on wet surfaces, or when temperature is below 45°F.  Wash tools in water.  Use a suitable paint thinner if material has dried.  Do not store in direct sunlight.  Container should be closed when not in use.  Because of alkali inherent in concrete surfaces there is no product guarantee on these.  Keep out of the reach of children.

Packaging:  5 gallon pails, 55 gallon drums and 275 gallon tote tanks.

User friendly, complies with all V.O.C. emissions and E.P.A. standards.

MATERIAL SPECIFICATIONS:            REQUIREMENTS:

   Weight per gallon, ASTM D1010 (lbs)                                                                       13.30 – 14.00

   Viscosity @ 77°F, ASTM D562 (Kreb’s Stormer Unit) for ambient application            75 – 80 KU

                                                                                               for heat application           85 – 100 KU

   % Weight solids                                                                                                           74.00 ± 2.00

   % Volume solids                                                                                                          58.00 ± 2.00

   Dry Time (15 mil. – wet) @ 77°F & 50% R.H. Dry to no pick-up                                 10 – 15 min

   VOC, grams/liter                                                                                                                        150

   Dry opacity, White & colors                                                                                                      0.92

   Fineness of dispersion, Hegman                                                                                                3.0

   Directional reflectance of white paint, %                                                                                      85

   Bleeding ratio                                                                                                                            0.95

Safety Data Sheets (SDS) -Click on links below to view PDF:

  White Zone Marking Paint

  Yellow Zone Marking Paint

  Red Zone Marking Paint

  Blue Zone Marking Paint

  Black Zone Marking Paint

Product Info Sheet (INFO) - Click on the link below to view PDF:

  Skipdash Zone Marking Paint